HORIZON PROJECT

<?xml version="1.0"?>

<doc>

    <assembly>

        <name>MySql.Web</name>

    </assembly>

    <members>

        <member name="M:MySql.Web.General.Application.EnsureId(MySql.Data.MySqlClient.MySqlConnection)">

            <summary>

            Creates the or fetch application id.

            </summary>

            <param name="applicationName">Name of the application.</param>

            <param name="applicationId">The application id.</param>

            <param name="applicationDesc">The application desc.</param>

            <param name="connection">The connection.</param>

        </member>

        <member name="M:MySql.Web.Security.CustomInstaller.Install(System.Collections.IDictionary)">

            <summary>

            When overridden in a derived class, performs the installation.

            </summary>

            <param name="stateSaver">An <see cref="T:System.Collections.IDictionary"/> used to save information needed to perform a commit, rollback, or uninstall operation.</param>

            <exception cref="T:System.ArgumentException">

            The <paramref name="stateSaver"/> parameter is null.

            </exception>

            <exception cref="T:System.Exception">

            An exception occurred in the <see cref="E:System.Configuration.Install.Installer.BeforeInstall"/> event handler of one of the installers in the collection.

            -or-

            An exception occurred in the <see cref="E:System.Configuration.Install.Installer.AfterInstall"/> event handler of one of the installers in the collection.

            </exception>

        </member>

        <member name="M:MySql.Web.Security.CustomInstaller.Uninstall(System.Collections.IDictionary)">

            <summary>

            When overridden in a derived class, removes an installation.

            </summary>

            <param name="savedState">An <see cref="T:System.Collections.IDictionary"/> that contains the state of the computer after the installation was complete.</param>

            <exception cref="T:System.ArgumentException">

            The saved-state <see cref="T:System.Collections.IDictionary"/> might have been corrupted.

            </exception>

            <exception cref="T:System.Configuration.Install.InstallException">

            An exception occurred while uninstalling. This exception is ignored and the uninstall continues. However, the application might not be fully uninstalled after the uninstallation completes.

            </exception>

        </member>

        <member name="T:MySql.Web.Security.MySQLMembershipProvider">

            <summary>

            Manages storage of membership information for an ASP.NET application in a MySQL database.

            </summary>

            <remarks>

            <para>

            This class is used by the <see cref="T:System.Web.Security.Membership"/> and <see cref="T:System.Web.Security.MembershipUser"/> classes

            to provide membership services for ASP.NET applications using a MySQL database.

            </para>

            </remarks>

            <example>

            <code source="CodeExamples/MembershipCodeExample2.xml"/>

            </example>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.Initialize(System.String,System.Collections.Specialized.NameValueCollection)">

            <summary>

            Initializes the MySQL membership provider with the property values specified in the

            ASP.NET application's configuration file. This method is not intended to be used directly

            from your code.

            </summary>

            <param name="name">The name of the <see cref="T:MySql.Web.Security.MySQLMembershipProvider"/> instance to initialize.</param>

            <param name="config">A collection of the name/value pairs representing the

            provider-specific attributes specified in the configuration for this provider.</param>

            <exception cref="T:System.ArgumentNullException">config is a null reference.</exception>

            <exception cref="T:System.InvalidOperationException">An attempt is made to call <see cref="M:System.Configuration.Provider.ProviderBase.Initialize(System.String,System.Collections.Specialized.NameValueCollection)"/> on a provider after the provider has already been initialized.</exception>

            <exception cref="T:System.Configuration.Provider.ProviderException"></exception>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.ApplicationName">

            <summary>

            The name of the application using the MySQL membership provider.

            </summary>

            <value>The name of the application using the MySQL membership provider.  The default is the

            application virtual path.</value>

            <remarks>The ApplicationName is used by the MySqlMembershipProvider to separate

            membership information for multiple applications.  Using different application names,

            applications can use the same membership database.

            Likewise, multiple applications can make use of the same membership data by simply using

            the same application name.

            Caution should be taken with multiple applications as the ApplicationName property is not

            thread safe during writes.

            </remarks>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            The application name setting is being used.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.EnablePasswordReset">

            <summary>

            Indicates whether the membership provider is configured to allow users to reset their passwords.

            </summary>

            <value>true if the membership provider supports password reset; otherwise, false. The default is true.</value>

            <remarks>Allows the user to replace their password with a new, randomly generated password.

            This can be especially handy when using hashed passwords since hashed passwords cannot be

            retrieved.</remarks>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.EnablePasswordRetrieval">

            <summary>

            Indicates whether the membership provider is configured to allow users to retrieve

            their passwords.

            </summary>

            <value>true if the membership provider is configured to support password retrieval;

            otherwise, false. The default is false.</value>

            <remarks>If the system is configured to use hashed passwords, then retrieval is not possible.

            If the user attempts to initialize the provider with hashed passwords and enable password retrieval

            set to true then a <see cref="T:System.Configuration.Provider.ProviderException"/> is thrown.</remarks>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.RequiresQuestionAndAnswer">

            <summary>

            Gets a value indicating whether the membership provider is

            configured to require the user to answer a password question

            for password reset and retrieval.

            </summary>

            <value>true if a password answer is required for password

            reset and retrieval; otherwise, false. The default is false.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.RequiresUniqueEmail">

            <summary>

            Gets a value indicating whether the membership provider is configured

            to require a unique e-mail address for each user name.

            </summary>

            <value>true if the membership provider requires a unique e-mail address;

            otherwise, false. The default is true.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.MaxInvalidPasswordAttempts">

            <summary>

            Gets the number of invalid password or password-answer attempts allowed

            before the membership user is locked out.

            </summary>

            <value>The number of invalid password or password-answer attempts allowed

            before the membership user is locked out.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.PasswordAttemptWindow">

            <summary>

            Gets the number of minutes in which a maximum number of invalid password or

            password-answer attempts are allowed before the membership user is locked out.

            </summary>

            <value>The number of minutes in which a maximum number of invalid password or

            password-answer attempts are allowed before the membership user is locked out.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.PasswordFormat">

            <summary>

            Gets a value indicating the format for storing passwords in the membership data store.

            </summary>

            <value>One of the <see cref="T:System.Web.Security.MembershipPasswordFormat"/>

            values indicating the format for storing passwords in the data store.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.MinRequiredNonAlphanumericCharacters">

            <summary>

            Gets the minimum number of special characters that must be present in a valid password.

            </summary>

            <value>The minimum number of special characters that must be present

            in a valid password.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.MinRequiredPasswordLength">

            <summary>

            Gets the minimum length required for a password.

            </summary>

            <value>The minimum length required for a password. </value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.PasswordStrengthRegularExpression">

            <summary>

            Gets the regular expression used to evaluate a password.

            </summary>

            <value>A regular expression used to evaluate a password.</value>

            <example>

            The following example shows the membership element being used in an applications web.config file.

            In this example, the regular expression specifies that the password must meet the following

            criteria:

            <ul>

            <list>Is at least seven characters.</list>

            <list>Contains at least one digit.</list>

            <list>Contains at least one special (non-alphanumeric) character.</list>

            </ul>

            <code source="CodeExamples/MembershipCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLMembershipProvider.WriteExceptionsToEventLog">

            <summary>

            Gets or sets a value indicating whether exceptions are written to the event log.

            </summary>

            <value>

                    <c>true</c> if exceptions should be written to the log; otherwise, <c>false</c>.

            </value>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.ChangePassword(System.String,System.String,System.String)">

            <summary>

            Changes the password.

            </summary>

            <param name="username">The username.</param>

            <param name="oldPassword">The old password.</param>

            <param name="newPassword">The new password.</param>

            <returns>true if the password was updated successfully, false if the supplied old password

            is invalid, the user is locked out, or the user does not exist in the database.</returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.ChangePasswordQuestionAndAnswer(System.String,System.String,System.String,System.String)">

            <summary>

            Changes the password question and answer.

            </summary>

            <param name="username">The username.</param>

            <param name="password">The password.</param>

            <param name="newPwdQuestion">The new password question.</param>

            <param name="newPwdAnswer">The new password answer.</param>

            <returns>true if the update was successful; otherwise, false. A value of false is

            also returned if the password is incorrect, the user is locked out, or the user

            does not exist in the database.</returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.CreateUser(System.String,System.String,System.String,System.String,System.String,System.Boolean,System.Object,System.Web.Security.MembershipCreateStatus@)">

            <summary>

            Adds a new membership user to the data source.

            </summary>

            <param name="username">The user name for the new user.</param>

            <param name="password">The password for the new user.</param>

            <param name="email">The e-mail address for the new user.</param>

            <param name="passwordQuestion">The password question for the new user.</param>

            <param name="passwordAnswer">The password answer for the new user</param>

            <param name="isApproved">Whether or not the new user is approved to be validated.</param>

            <param name="providerUserKey">The unique identifier from the membership data source for the user.</param>

            <param name="status">A <see cref="T:System.Web.Security.MembershipCreateStatus"/> enumeration value indicating whether the user was created successfully.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUser"/> object populated with the information for the newly created user.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.DeleteUser(System.String,System.Boolean)">

            <summary>

            Removes a user from the membership data source.

            </summary>

            <param name="username">The name of the user to delete.</param>

            <param name="deleteAllRelatedData">true to delete data related to the user from the database; false to leave data related to the user in the database.</param>

            <returns>

            true if the user was successfully deleted; otherwise, false.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetAllUsers(System.Int32,System.Int32,System.Int32@)">

            <summary>

            Gets a collection of all the users in the data source in pages of data.

            </summary>

            <param name="pageIndex">The index of the page of results to return. <paramref name="pageIndex"/> is zero-based.</param>

            <param name="pageSize">The size of the page of results to return.</param>

            <param name="totalRecords">The total number of matched users.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUserCollection"/> collection that contains a page of <paramref name="pageSize"/><see cref="T:System.Web.Security.MembershipUser"/> objects beginning at the page specified by <paramref name="pageIndex"/>.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetNumberOfUsersOnline">

            <summary>

            Gets the number of users currently accessing the application.

            </summary>

            <returns>

            The number of users currently accessing the application.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetPassword(System.String,System.String)">

            <summary>

            Gets the password for the specified user name from the data source.

            </summary>

            <param name="username">The user to retrieve the password for.</param>

            <param name="answer">The password answer for the user.</param>

            <returns>

            The password for the specified user name.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetUser(System.String,System.Boolean)">

            <summary>

            Gets information from the data source for a user. Provides an option to update the last-activity date/time stamp for the user.

            </summary>

            <param name="username">The name of the user to get information for.</param>

            <param name="userIsOnline">true to update the last-activity date/time stamp for the user; false to return user information without updating the last-activity date/time stamp for the user.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUser"/> object populated with the specified user's information from the data source.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetUser(System.Object,System.Boolean)">

            <summary>

            Gets user information from the data source based on the unique identifier for the membership user. Provides an option to update the last-activity date/time stamp for the user.

            </summary>

            <param name="providerUserKey">The unique identifier for the membership user to get information for.</param>

            <param name="userIsOnline">true to update the last-activity date/time stamp for the user; false to return user information without updating the last-activity date/time stamp for the user.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUser"/> object populated with the specified user's information from the data source.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.UnlockUser(System.String)">

            <summary>

            Unlocks the user.

            </summary>

            <param name="username">The username.</param>

            <returns>true if the membership user was successfully unlocked;

            otherwise, false. A value of false is also returned if the user

            does not exist in the database. </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.GetUserNameByEmail(System.String)">

            <summary>

            Gets the user name associated with the specified e-mail address.

            </summary>

            <param name="email">The e-mail address to search for.</param>

            <returns>

            The user name associated with the specified e-mail address. If no match is found, return null.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.ResetPassword(System.String,System.String)">

            <summary>

            Resets a user's password to a new, automatically generated password.

            </summary>

            <param name="username">The user to reset the password for.</param>

            <param name="answer">The password answer for the specified user.</param>

            <returns>The new password for the specified user.</returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.UpdateUser(System.Web.Security.MembershipUser)">

            <summary>

            Updates information about a user in the data source.

            </summary>

            <param name="user">A <see cref="T:System.Web.Security.MembershipUser"/> object

            that represents the user to update and the updated information for the user.</param>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.ValidateUser(System.String,System.String)">

            <summary>

            Verifies that the specified user name and password exist in the data source.

            </summary>

            <param name="username">The name of the user to validate.</param>

            <param name="password">The password for the specified user.</param>

            <returns>

            true if the specified username and password are valid; otherwise, false.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.FindUsersByName(System.String,System.Int32,System.Int32,System.Int32@)">

            <summary>

            Gets a collection of membership users where the user name contains the specified user name to match.

            </summary>

            <param name="usernameToMatch">The user name to search for.</param>

            <param name="pageIndex">The index of the page of results to return. <paramref name="pageIndex"/> is zero-based.</param>

            <param name="pageSize">The size of the page of results to return.</param>

            <param name="totalRecords">The total number of matched users.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUserCollection"/> collection that contains a page of <paramref name="pageSize"/><see cref="T:System.Web.Security.MembershipUser"/> objects beginning at the page specified by <paramref name="pageIndex"/>.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.FindUsersByEmail(System.String,System.Int32,System.Int32,System.Int32@)">

            <summary>

            Gets a collection of membership users where the e-mail address contains the specified e-mail address to match.

            </summary>

            <param name="emailToMatch">The e-mail address to search for.</param>

            <param name="pageIndex">The index of the page of results to return. <paramref name="pageIndex"/> is zero-based.</param>

            <param name="pageSize">The size of the page of results to return.</param>

            <param name="totalRecords">The total number of matched users.</param>

            <returns>

            A <see cref="T:System.Web.Security.MembershipUserCollection"/> collection that contains a page of <paramref name="pageSize"/><see cref="T:System.Web.Security.MembershipUser"/> objects beginning at the page specified by <paramref name="pageIndex"/>.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLMembershipProvider.HashPasswordBytes(System.Byte[],System.Byte[])">

            <summary>

            this method is only necessary because early versions of Mono did not support

            the HashAlgorithmType property

            </summary>

            <param name="bytes"></param>

            <returns></returns>

        </member>

        <member name="T:MySql.Web.Security.MySqlDatabaseWrapper">

            <summary>

            Perform basic operations against a Database

            </summary>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.#ctor(System.String)">

            <summary>

            Initialize a new instance of the class

            </summary>

            <param name="connectionString">Connection String</param>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.Close">

            <summary>

            Close the current instance

            </summary>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.Dispose">

            <summary>

            Dispose the current instance

            </summary>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.ExecuteQuery(System.String,System.Object[])">

            <summary>

            Execute given query on the database

            </summary>

            <param name="cmdText">Query to exeute</param>

            <param name="parametersValues">Parameters used in the query</param>

            <returns>Query resultset</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.ExecuteQuerySingleRecord(System.String,System.Object[])">

            <summary>

            Execute given query on the database

            </summary>

            <param name="cmdText">Query to exeute</param>

            <param name="parametersValues">Parameters used in the query</param>

            <returns>First record in the Query resultset</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.ExecuteNonQuery(System.String,System.Object[])">

            <summary>

            Execute given query on the database

            </summary>

            <param name="cmdText">Query to exeute</param>

            <param name="parametersValues">Parameters used in the query</param>

            <returns>Rows affected by the query</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.ExecuteScalar(System.String,System.Object[])">

            <summary>

            Execute given query on the database

            </summary>

            <param name="cmdText">Query to exeute</param>

            <param name="parametersValues">Parameters used in the query</param>

            <returns>Value of the first column in the first row in the query resulset</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.ExecuteInTransaction(System.Collections.Generic.IEnumerable{System.Tuple{System.String,System.Object[]}})">

            <summary>

            Execute all given queries on the database inside of a transaction

            </summary>

            <param name="commands">Queries to exeute</param>

            <returns>If queries were successfully executed</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.CheckIsConnectionOpen">

            <summary>

            Verifies if the current connection is open, if not is opened

            </summary>

        </member>

        <member name="M:MySql.Web.Security.MySqlDatabaseWrapper.AddParameters(MySql.Data.MySqlClient.MySqlCommand,System.Object[])">

            <summary>

            Add parameters to a command, nomenclature name used for the parameters are 'param[n]'

            </summary>

            <param name="cmd">Command that will stores the parameters</param>

            <param name="values">Parameters values</param>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.ChangePassword(System.String,System.String,System.String)">

            <summary>

            Change the password for the user provided

            </summary>

            <param name="userName">User name</param>

            <param name="oldPassword">Current pasword</param>

            <param name="newPassword">New Password</param>

            <returns></returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.ConfirmAccount(System.String)">

            <summary>

            Confirms user by confirmation token

            </summary>

            <param name="confirmationToken">Confirmation token</param>

            <returns>If user was confirmed</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.ConfirmAccount(System.String,System.String)">

            <summary>

            Confirms user by confirmation token and user name

            </summary>

            <param name="userName">User name</param>

            <param name="confirmationToken">Confirmation token</param>

            <returns>If user was confirmed</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.CreateAccount(System.String,System.String,System.Boolean)">

            <summary>

            Create user account

            </summary>

            <param name="userName">User Name</param>

            <param name="password">User password</param>

            <param name="requireConfirmationToken">Confirmation token is required?</param>

            <returns>Confirmation token if required</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.CreateUserAndAccount(System.String,System.String,System.Object,System.Boolean)">

            <summary>

            Create user and account

            </summary>

            <param name="userName">User Name</param>

            <param name="password">User Password</param>

            <param name="additionalUserAttributes">Additional data for user table</param>

            <param name="requireConfirmationToken">Confirmation token is required?</param>

            <returns>Confirmation token if required</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetCreateDate(System.String)">

            <summary>

            Get the date when the specified user was created

            </summary>

            <param name="userName">User Name</param>

            <returns>Date created or minimum date value if the user was not found</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetLastPasswordFailureDate(System.String)">

            <summary>

            Get last date when password fails

            </summary>

            <param name="userName">User Name</param>

            <returns>Last failure date or minimum date value if the user was not found</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetPasswordChangedDate(System.String)">

            <summary>

            Get date when password was changed

            </summary>

            <param name="userName">User Name</param>

            <returns>Last password changed date or minimum date value if the user was not found</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetPasswordFailuresSinceLastSuccess(System.String)">

            <summary>

            Password failures since last success

            </summary>

            <param name="userName">User Name</param>

            <returns>Number of failures since last success</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GeneratePasswordResetToken(System.String,System.Int32)">

            <summary>

            Generates password reset token for confirmed user

            </summary>

            <param name="userName">User Name</param>

            <param name="tokenExpirationInMinutesFromNow">Time that the token will be valid</param>

            <returns>Token generated or null if the user is not confirmed or does not has a token</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetUserId(System.String)">

            <summary>

            Get user id

            </summary>

            <param name="userName">User Name</param>

            <returns>User Id, -1 if user doesn't exists</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.GetUserIdFromPasswordResetToken(System.String)">

            <summary>

            Get User Id from password reset token

            </summary>

            <param name="resetToken">Reset token</param>

            <returns>User Id, 0 if user dosn't exists</returns>

        </member>

        <member name="M:MySql.Web.Security.MySqlWebSecurity.InitializeDatabaseConnection(System.String,System.String,System.String,System.String,System.Boolean,System.Boolean)">

            <summary>

            Initialize the simple membership provider with the values given

            </summary>

            <param name="connectionStringName">Connection string name defined in config file</param>

            <param name="userTableName">Table name defined to create new users</param>

            <param name="userIdColumn">Column name defined that will store the user id</param>

            <param name="userNameColumn">Column name defined that will store the user name</param>

            <param name="createTables">Create tables?</param>

        </member>

        <member name="T:MySql.Web.Security.MySQLRoleProvider">

            <summary>

            Manages storage of role membership information for an ASP.NET application in a MySQL database.

            </summary>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.Initialize(System.String,System.Collections.Specialized.NameValueCollection)">

            <summary>

            Initializes the provider.

            </summary>

            <param name="name">The friendly name of the provider.</param>

            <param name="config">A collection of the name/value pairs representing the provider-specific attributes specified in the configuration for this provider.</param>

            <exception cref="T:System.ArgumentNullException">The name of the provider is null.</exception>

            <exception cref="T:System.ArgumentException">The name of the provider has a length of zero.</exception>

            <exception cref="T:System.InvalidOperationException">An attempt is made to call <see cref="M:System.Configuration.Provider.ProviderBase.Initialize(System.String,System.Collections.Specialized.NameValueCollection)"/> on a provider after the provider has already been initialized.</exception>

        </member>

        <member name="P:MySql.Web.Security.MySQLRoleProvider.ApplicationName">

            <summary>

            Gets or sets the name of the application to store and retrieve role information for.

            </summary>

            <value>The name of the application to store and retrieve role information for.</value>

            <example>

            <code source="CodeExamples\RoleCodeExample1.xml"/>

            </example>

        </member>

        <member name="P:MySql.Web.Security.MySQLRoleProvider.WriteExceptionsToEventLog">

            <summary>

            Gets or sets a value indicating whether [write exceptions to event log].

            </summary>

            <value>

                    <c>true</c> if exceptions should be written to the event log; otherwise, <c>false</c>.

            </value>

            <example>

            <code source="CodeExamples\RoleCodeExample1.xml"/>

            </example>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.AddUsersToRoles(System.String[],System.String[])">

            <summary>

            Adds the users to roles.

            </summary>

            <param name="usernames">The usernames.</param>

            <param name="rolenames">The rolenames.</param>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.CreateRole(System.String)">

            <summary>

            Creates the role.

            </summary>

            <param name="rolename">The rolename.</param>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.DeleteRole(System.String,System.Boolean)">

            <summary>

            Deletes the role.

            </summary>

            <param name="rolename">The rolename.</param>

            <param name="throwOnPopulatedRole">if set to <c>true</c> [throw on populated role].</param>

            <returns>true if the role was successfully deleted; otherwise, false. </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.GetAllRoles">

            <summary>

            Gets a list of all the roles for the configured applicationName.

            </summary>

            <returns>

            A string array containing the names of all the roles stored in the data source for the configured applicationName.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.GetRolesForUser(System.String)">

            <summary>

            Gets a list of the roles that a specified user is in for the configured applicationName.

            </summary>

            <param name="username">The user to return a list of roles for.</param>

            <returns>

            A string array containing the names of all the roles that the specified user is in for the configured applicationName.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.GetUsersInRole(System.String)">

            <summary>

            Gets the users in role.

            </summary>

            <param name="rolename">The rolename.</param>

            <returns>A string array containing the names of all the users

            who are members of the specified role. </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.IsUserInRole(System.String,System.String)">

            <summary>

            Determines whether [is user in role] [the specified username].

            </summary>

            <param name="username">The username.</param>

            <param name="rolename">The rolename.</param>

            <returns>

                    <c>true</c> if [is user in role] [the specified username]; otherwise, <c>false</c>.

            </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.RemoveUsersFromRoles(System.String[],System.String[])">

            <summary>

            Removes the users from roles.

            </summary>

            <param name="usernames">The usernames.</param>

            <param name="rolenames">The rolenames.</param>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.RoleExists(System.String)">

            <summary>

            Roles the exists.

            </summary>

            <param name="rolename">The rolename.</param>

            <returns>true if the role name already exists in the database; otherwise, false. </returns>

        </member>

        <member name="M:MySql.Web.Security.MySQLRoleProvider.FindUsersInRole(System.String,System.String)">

            <summary>

            Finds the users in role.

            </summary>

            <param name="rolename">The rolename.</param>

            <param name="usernameToMatch">The username to match.</param>

            <returns>A string array containing the names of all the users where the

            user name matches usernameToMatch and the user is a member of the specified role. </returns>

        </member>

        <member name="T:MySql.Web.Personalization.MySqlPersonalizationProvider">

            <summary>

            Implementation for Personalization Provider

            to use web parts in ASP.NET websites

            </summary>

        </member>

        <member name="P:MySql.Web.Personalization.MySqlPersonalizationProvider.ApplicationName">

            <summary>

            Set or gets the Application Name

            </summary>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.Initialize(System.String,System.Collections.Specialized.NameValueCollection)">

            <summary>

            Initializes settings values for Personalization Provider

            </summary>

            <param name="name"></param>

            <param name="config"></param>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.FindState(System.Web.UI.WebControls.WebParts.PersonalizationScope,System.Web.UI.WebControls.WebParts.PersonalizationStateQuery,System.Int32,System.Int32,System.Int32@)">

            <summary>

            Returns a collection of PersonalizationStateInfo objects containing administrative information regarding records in the database that match the specified criteria

            -for example, records corresponding to users named Jeff* that have been modified since January 1, 2005. Wildcard support is provider-dependent.

            </summary>

            <param name="scope"></param>

            <param name="query"></param>

            <param name="pageIndex"></param>

            <param name="pageSize"></param>

            <param name="totalRecords"></param>

            <returns></returns>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.GetCountOfState(System.Web.UI.WebControls.WebParts.PersonalizationScope,System.Web.UI.WebControls.WebParts.PersonalizationStateQuery)">

            <summary>

            Returns the number of records in the database that match the specified criteria-

            for example, records corresponding to users named Jeff* that haven't been modified since January 1, 2005. Wildcard support is provider-dependent.

            </summary>

            <param name="scope"></param>

            <param name="query"></param>

            <returns></returns>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.LoadPersonalizationBlobs(System.Web.UI.WebControls.WebParts.WebPartManager,System.String,System.String,System.Byte[]@,System.Byte[]@)">

            <summary>

            Retrieves personalization state as opaque blobs from the data source. Retrieves both shared and user personalization state corresponding to a specified user and a specified page.

            </summary>

            <param name="webPartManager"></param>

            <param name="path"></param>

            <param name="userName"></param>

            <param name="sharedDataBlob"></param>

            <param name="userDataBlob"></param>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.ResetPersonalizationBlob(System.Web.UI.WebControls.WebParts.WebPartManager,System.String,System.String)">

            <summary>

            Deletes personalization state corresponding to a specified user and a specified page from the database.

            </summary>

            <param name="webPartManager"></param>

            <param name="path"></param>

            <param name="userName"></param>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.ResetState(System.Web.UI.WebControls.WebParts.PersonalizationScope,System.String[],System.String[])">

            <summary>

            Deletes personalization state corresponding to the specified users and specified pages from the database

            </summary>

            <param name="scope"></param>

            <param name="paths"></param>

            <param name="usernames"></param>

            <returns></returns>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.ResetUserState(System.String,System.DateTime)">

            <summary>

            Deletes user personalization state corresponding to the specified pages and that hasn't been updated since a specified date from the database.

            </summary>

            <param name="path"></param>

            <param name="userInactiveSinceDate"></param>

            <returns></returns>

        </member>

        <member name="M:MySql.Web.Personalization.MySqlPersonalizationProvider.SavePersonalizationBlob(System.Web.UI.WebControls.WebParts.WebPartManager,System.String,System.String,System.Byte[])">

            <summary>

            Writes personalization state corresponding to a specified user and a specified page as an opaque blob to the database.

            If userName is null, then the personalization state is shared state and is not keyed by user name.

            </summary>

            <param name="webPartManager"></param>

            <param name="path"></param>

            <param name="userName"></param>

            <param name="dataBlob"></param>

        </member>

        <member name="M:MySql.Web.Personalization.PersonalizationProviderProcedures.myaspnet_PersonalizationAdministration_FindState(System.Boolean,System.Int64,System.String,System.Int32,System.Int32,System.String,System.String,System.DateTime,MySql.Web.MySQLPersonalizationConnectionHelper,MySql.Data.MySqlClient.MySqlCommand@)">

            <summary>

            Retrieves profile data from my_aspnet_PersonalizationAllUsers or my_aspnet_PersonalizationPerUser meeting several input criteria.

            </summary>

        </member>

        <member name="M:MySql.Web.Personalization.PersonalizationProviderProcedures.my_aspnet_PersonalizationPerUser_SetPageSettings(System.Int64,System.String,System.String,System.Byte[],System.DateTime,MySql.Web.MySQLPersonalizationConnectionHelper)">

            <summary>

            Saves per-user state for the specified page and the specified user in the my_aspnet_PersonalizationPerUser table.

            </summary>

            <returns></returns>